Summary:
Lubricate system procedure controller will do program and digital conformity according to work step of oil pump and failure state, is Inte grated  procedure controller with the functions of control running time of oil pump, interval time of stopping, alarm indication of oil road fail ure, running and stop time display etcIt has good control effect to control oil pump timely open and stop, control oil volume input balance, ensure oil road smooth and maintenance equipment normal running.

operation method of function setting£º
1. Press SET key, enter into oil pump motor running time setting status  after 5 seconds, the running indication lamp turns on at this time, the last  Number flashes, press key of ¡÷can add one figure to flash  tube. .Pressing key of      can make flash number move left, set the former number according
to Sequence, that will be the set value of motor running time. 
2.After setting the running time, press key of  SET to enter into status of oil pump motor stopping time  time setting, at this time the stop indication Light turns on, the setting method is same as above.
3.After finishing the stop time setting, press  SET key again, the oil pump motor will enter into normal work status, oil pump starts to run under  Procedure.